Fault Description:

1 iPhone 6 battery consumption fast and overheating

文章標籤

diyphonetool 發表在 痞客邦 留言(0) 人氣()

China Spring Day will come, so we will share some tips about some common failure: Zebra flicker on the screen, Screen Touch function unstable or iPhone 6P touch unresponsive . You will save your money after you get the repair skills. The first step we need to do is to test the iPhone 6P motherboard., most of problem can be checked by this process.

At the same time, we can see that the 18 pin is the synchronous signal of CPU through the black touch M1 pin. If all these resistances are normal, voltage test should be started. By voltage test, we can more accurately judge which chip is damaged. As shown in picture 11-12-1.

文章標籤

diyphonetool 發表在 痞客邦 留言(0) 人氣()

 

The next phone is occurred LCD Screen has no display and no light after boot.

文章標籤

diyphonetool 發表在 痞客邦 留言(0) 人氣()

When your iPhone 6 battery  power consumes very fast, don't be nervous;

When iphone 6 sensor can't be used, please keep calm.

文章標籤

diyphonetool 發表在 痞客邦 留言(0) 人氣()

Phenomenon:  iPhone 7P reboot repeatedly while white apple logo appears.

Related question:  unstable current or voltage caused the fault.

文章標籤

diyphonetool 發表在 痞客邦 留言(0) 人氣()

After getting the fixed iPhone 6SP, we observed its main board, we can see it has slight water influent, but no obvious corrosion , and there is no other deformation on the board.  So this iPhone motherboard No Touch Function may be caused by the short circuit, following the detail fix process:

文章標籤

diyphonetool 發表在 痞客邦 留言(0) 人氣()

Error 5 6 has the following common problems :

(1) Before we use the telecom number to flash ,we should pull out the SIM CARD , then insert the SIM card after the flash is successful.

文章標籤

diyphonetool 發表在 痞客邦 留言(0) 人氣()

No responsive while pressing iPhone6 home button, we call it the Phone home button failed to return. Then we ruled out external issues after checking the current and voltage compared with the normal value, we excluded the peripheral accessories issues. We judged the the problem appears on the iPhone motherboard, following the deal way.

文章標籤

diyphonetool 發表在 痞客邦 留言(0) 人氣()

A customer sent a cellphone for us and said that "iPhone 6S cannot boot after normal use". This problem is common and can happen to any iPhone at any time for a variety of reasons. In this article, we are going to address this problem, showing you a few ways to fix it. More information about phone repair guides and tools, you can ask help for Vip Fix Shop Team.

Example10-1-1.jpg

diyphonetool 發表在 痞客邦 留言(0) 人氣()

Get the iphone 6 plus from our VIP customer. According to the customer describes:

1 No Display frequencies.

文章標籤

diyphonetool 發表在 痞客邦 留言(0) 人氣()

«123