No responsive while pressing iPhone6 home button, we call it the Phone home button failed to return. Then we ruled out external issues after checking the current and voltage compared with the normal value, we excluded the peripheral accessories issues. We judged the the problem appears on the iPhone motherboard, following the deal way.
Use multimeter to measure whether the iPhone motherboard fingerprint socket J2118#3 pin has resistance, the data is normal. When measure the voltage, we found the BUTTON_TO_AP_MENU_KEY_L_CONN only has 0.6V, it is obviously been pulled down, the normal voltage is around 1.3V. You can check those pins on phone circuit diagram.
R0313 starts with 392K, now we change it to 10K resistance, and then measure it again, we found the voltage reached 1.4V, almost normal. So we assemble the iPhone and test it, we found it's still no return function after we install the fingerprint button. However, when we use tweezers to press the J2118#3 pin ground, it can return. We suspect it is a fingerprint key problem.
After measuring, we found there is a 20K current limiting resistance on the BUTTON_TO_AP_MENU_KEY_L_CONN of fingerprint key. Decisively remove that resistor, and then use the phone soldering station to directly short connect them.
After we finished the above test and fix steps while assemble the iPhone again with phone screwdrivers,we can reboot it through pressing the home button, screen turns on bright.
留言列表
